How Much Does It Cost to Build a Deck in NC? (2026 Pricing Guide)

How much does it cost to build a deck in NC? At Fiferum Construction, our quotes around the Triangle have run from $14,700 for a 100-square-foot pressure-treated deck up to $74,800 for a 300-square-foot, two-level composite deck with an all-season room attached.

That’s a wide spread, and it’s wide because a deck price is a stack of decisions where the square footage is only the first one.

A per-square-foot figure from a national cost calculator gives you a starting point, and a finished North Carolina deck adds footings, stairs, a landing, a code-compliant railing, drawings, and inspections on top of it, which is where much of the money goes.

Spacious gray composite deck with white vinyl railings attached to a home with blue siding.

Three Real Deck Quotes From Around the Triangle

These are actual Fiferum quotes, with the details that drove each number.

LocationSizeWhat’s in itQuoted price
Chapel Hill100 sq ftPressure-treated framing, Southern yellow pine decking, standard railing, three steps with a landing$14,700
Durham200 sq ftPressure-treated deck with a herringbone decking pattern and a custom wooden railing$29,300
Cary300 sq ft, two levelsTrex decking, Trex handrails with a drink rail, and an all-season room with custom glass windows and removable screens$74,800

Work out the first two and they land at almost the same price per square foot, about $147, even with the Durham deck’s herringbone pattern and custom railing, so don’t count on a bigger deck getting much cheaper per foot.

Pressure-Treated Pine or Composite

Elevated wooden deck under construction with black metal railings, stairs, and exposed pergola framing.

For a basic 200-square-foot deck, we’d put pressure-treated pine at around $30,000 and composite at around $40,000.

Either way, the frame underneath is grade #1 pressure-treated lumber, so the $10,000 difference is mostly the decking boards themselves.

Composite boards from Trex and TimberTech don’t rot, never need restaining, and carry a 25-year limited residential fade and stain warranty from the manufacturer.

Pressure-treated pine needs stain every two to three years, and staining a 200-square-foot deck runs about $1,600 to $2,500 a visit.

Over fifteen years that’s five or six restains, which adds up to roughly $8,000 to $15,000 at today’s prices and closes most of the gap.

So if you plan to stay in the house a long while, composite usually earns its premium, and if the deck is a sturdy, good-looking fix before a sale in a few years, pressure-treated pine is the sensible spend.

There’s more on the boards themselves in our composite decking pros and cons, and our guide to sealing a deck covers what wood upkeep looks like year to year.

What Pushes a Deck Quote Higher

Popular upgrades typically add $10,000 to $20,000 to a basic build, and these are the ones that move it most:

  • A second level or a tall drop to the yard. More posts, longer stair runs, and extra landings all add framing and labor, which is part of why the two-level Cary deck sits where it does.
  • Decking patterns. A herringbone or picture-frame layout takes more cuts and extra framing underneath to support the board ends.
  • Custom railings. A built wooden railing or a drink rail along the top costs more than a standard railing system, and it’s the part of the deck your hands touch most.
  • Enclosing the space. Screens, glass, and a roof turn a deck into a room, and our screened-in porch cost breakdown has that pricing on its own.
  • Ground and paperwork. Engineer drawings, land surveys for impervious-surface calculations, and soft or sloped ground can all show up in a quote, and some lots call for helical piers to reach load-bearing soil.

The $40,000 Line in North Carolina

Under North Carolina’s general contractor statute, the builder on any project costing $40,000 or more has to hold a general contractor license.

With a 200-square-foot composite deck landing right around that figure, plenty of NC deck projects cross the line.

Below $40,000, state law lets a builder work without that license, so ask any deck builder for their license number before you sign, whatever the size of the job.

Fiferum Construction is a licensed and insured general contractor, NC license #99274.

Deck Cost Questions We Hear Most

Do I need a permit to build a deck in NC?

Most decks attached to a house need a building permit and inspections from your town or county, and you’ll find what the inspector checks in our rundown of the North Carolina deck building code.

Can I buy my own materials to save money?

You can, though we can’t warranty work when the client supplies the materials, so whatever you save on lumber comes with that tradeoff.

How much more does a screened porch cost than a deck?

Our screened-in porches run about $45,000 to $66,000 for 150 square feet, because a roof, posts sized to carry it, and screen panels all go on top of the deck framing.

Is a warranty included in the price?

Every deck we build comes with the manufacturer’s warranty on materials plus our own 5-year workmanship warranty.

Covered wooden deck with metal wire railings, outdoor wicker seating, and views of a landscaped backyard.

Find Out Where Your Deck Lands Between $14,700 and $74,800

Tell us the size you have in mind, the material you’re leaning toward, and roughly how high the deck sits off the ground, and we’ll look at the site with you and put together a written quote for your deck building project.

Call us at (919) 638-0986 or message us here.

Alex Bethurum

Alex Betherum

Hi, I’m Alex Bethurum, the owner of Fiferum Construction. I started working in construction at 18 and founded the company with my wife to deliver reliable, high-quality outdoor projects built to last.

All Posts